HP LaserJet 1150 Series - Spring (Mechanism); Other Accessories; Cleaning Supplies; Manual

LaserJet 1150 series printe
r
HP Parts Reference Guide™
www.hp.com/go/hpparts
Other Accessories
Cleaning Supplies
5090-3379 Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for clening up toner spills
Manual
5851-1468 LaserJet printer family paper specification guide
Q1334-90928 HP LaserJet 1300 and LaserJet 1150 service manual
Other Internal Parts
Bracket
49
RA0-1185-000CN Left side fuser bracket ('L' Shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear
corner of the left side plate
50
RA0-1186-000CN Right side fuser bracket ('L' Shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear
corner of the right side plate
Fan/Airflow Guide
51
RM1-0547-000CN Fan and airflow guide assembly - Mounts to the upper front on the right side plate assembly
Gear
52
RA0-1176-000CN 69 tooth gear - Large gear with ribs and six small holes - Mounts on on a rod in the upper rear corner of the right side
plate
Gear Assembly
53
RA0-1016-000CN 87 tooth / 23 tooth dual gear assembly - (Reduction gear) Drives the paper feed roller gear - Mounts on the right side
plate assembly
Guide
RM1-0546-000CN Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right
side plates
55
RM1-0682-000CN Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right
side plates
Motor
56
RK2-0062-000CN DC stepper motor assembly - Drives all rollers amd fusing assembly via the gear train on the right side - Mounts on the
inside rear of the right side plate assembly
Plate
57
RM1-0528-000CN Left plate assembly - Left side of internal printer mechanism - Plate that the formatter PC board mounts to
58
RM1-0678-000CN Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam levers - Does not
come with the pick-up roller solenoid or 69 tooth gear - Right side of the internal printer mechanism
Spring
59
RA0-1006-000CN Tension spring - Provides tension for the floating gear holder (drive gear for the fusing assembly) - Mounts on the right
side plate assembly
60
RA0-1012-000CN Compression Spring - Grounds the pin in the toner cartridge drive gear - Mounts on the right side plate assembly
61
RA0-1026-000CN Torsion spring - Provides grounding connection to the toner cartridge (Photo sensitive drum) - Mounts on the inside of
the right side plate assembly
62
RA0-1035-000CN Torsion spring - Provides high voltage connection to the toner cartridge (developing cylinder) - Mounts on the left front
side of the paper feed guide assembly
63
RA0-1200-000CN Torsion spring - Provides high voltage connection to the toner cartridge (primary charging roller) - Mounts on the left rear
side of the paper feed guide assembly
64
RA0-1212-000CN Tensoin spring - Provides tension for the linkage which engages the toner cartridge drive gear - Mounts on the right side
plate
65
RC1-1765-000CN Torsion spring - Mounts under the toner cartridge retainer arm on the rear of the left side plate
Paper Path Parts
Delivery
66
RM1-0556-020CN Face-down delivery assembly - Includes the support frame, drive roller and gear, and the four spring loaded pressure
rollers - Mounts in the upper rear of the fusing assembly
© 2004 Hewlett-Packard 3