4. Close the straight-through output door.
Figure 19: Straight-through output door (close)
closing the straight-through output door
The pressure release levers automatically close when you close the straight-through
output door.
Automatic two-sided printing (duplexing) path
To clear a jam in the automatic two-sided path, perform the following steps:
CAUTION: Do not use sharp objects, such as tweezers or needlenose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
1. Open the straight-through output door.
Figure 20: Straight-through output door
opening the straight-through output door
2. Rotate the green pressure release levers downward.
Figure 21: Green pressure release levers
To Next Page
Loading...