Printer control panel
The printer control panel is comprised of four lights and two buttons. The HP LaserJet
1320nw printer has an additional light at the top of the control panel. These lights produce
patterns that identify your printer status.
1 Wireless light (HP LaserJet 1320nw printer only): When the Wireless light is on solid, a
wireless connection has been established. When the Wireless light is off, wireless operation is
disabled. When the Wireless light is flashing, the printer is trying to establish a wireless
connection.
2 Toner light: When the toner is low, the Toner light is on solid. When the print cartridge is out of
the printer or when the print cartridge is empty, the Toner light is flashing.
3 Attention light: Indicates that the input tray is empty, the print-cartridge door is open, or that
other errors exist. See
Printer information pages for more information.
4 Ready light: Indicates that the printer is ready to print.
5 G
O
button and light: To print a Demo page or to continue printing while in the manual feed
mode, press and release the G
O
button. To print a configuration page, press and hold the G
O
button for 5 seconds.
6 C
ANCEL
button: To cancel the print job that is currently printing, press the C
ANCEL
button.
NOTE
See Status-light patterns for a description of the light patterns.
32 Chapter 3 Operation ENWW
To Next Page
Loading...
