EN
Removing a DIMM
249
Removing a DIMM
To remove a DIMM, follow the
instructions below:
CAUTION
Handling a DIMM chip (memory) without
wearing a grounded, antistatic device
might damage the DIMM chip.
1
Turn off the power switch (220v
models only), and unplug the printer.
2
To open the left side panel, gently
pull it out.
3
To unlock the cam latches, press
them outward (A). Grasp the DIMM
chip on the edge, gently pull straight
out, and remove the chip from the
printer (B).
Note
Store the DIMM chip in an antistatic bag.
1
2
3
To Next Page
Loading...
