EN
Identifying the copier/scanner’s components
31
Media input tray, guides, and output bin
The media input tray (1) is located on the front, top side of the
scanner. The media guides (2), which are located on the media
input tray, ensure that the media is correctly fed into the scanner
and prevent skewing (crooked image). The output bin (3) is below
the media input tray.
CAUTION
If the media is not loaded correctly, the media might jam and the original
that you are scanning or copying might be damaged. See Loading
originals in the copier/scanner for more information.
Copier/scanner door
The copier/scanner door is located on the top of the
copier/scanner. You must open the copier/scanner door to
remove jams or clean the copier/scanner. To release the latch
and open the door, press the button located on the right side, and
gently grasp the door and rotate it open. To close the door, rotate
the door until it clicks.
1 2 3
To Next Page
Loading...
