EN
Printing on both sides of the paper (manual duplexing)
73
Manual duplex on heavy
media or card stock
For heavy media, such as card stock,
use the straight-through output path.
1
Load the media, and open the
straight-through output door.
2
Access the printer properties. See
Printer properties (driver)
for
instructions. On the
Finishing
tab,
click
Print on Both Sides
, select the
Straight Paper Path
check box, and
click
OK
. Print the document.
3
After side one has printed, remove
the remaining paper from the input
tray and set it aside until after you
finish your manual duplexing job.
4
Gather the printed pages, turn the
printed side down, and straighten
the stack before placing it back in the
input tray. Side one should be facing
down with the top edge toward the
printer.
Click
OK
(on screen), and wait for
side two to print.
1
2
3
4
To Next Page
Loading...
