102 Chapter 6 Troubleshooting C4170-90959
EIO Error (81 error)
(Secondary Error Message)
The EIO accessory has encountered a critical
error.
1) Power cycle the printer.
2) Reseat or replace the EIO accessory.
Memory Configuration Error
(Secondary Error Message)
1) Reprint the job.
2) Perform a cold reset.
3) Replace DIMMs/memory.
4) Replace the formatter.
Personality, Job Related Error
(Secondary Error Message)
30076 1) Perform a cold reset.
2) Remove/replace the language DIMM (PS
DIMM).
3) If all else fails, replace the formatter.
General Continuable Error
(Secondary Error Message)
1) Check connections on the Intermediate
PCB. Replace if damaged.
2) Replace the Formatter PCB.
3) Replace the Engine Controller.
Secondary Continuable Error
Control Panel LED
Pattern
Secondary Error
Message
Status Log Code Recommended Action
To Next Page
Loading...