C4170-90959
Parts Removal Tree
197
Lower Output Delivery Roller Removal
1 Remove the following assemblies:
• Remove the toner cartridge. (See “Toner Cartridge Removal” (page 160) for
instructions.)
• Remove Tray 2. (See “Tray 2 Removal” (page 161) for instructions.)
• Remove the DIMM cover. (See “DIMM Cover Removal” (page 175) for instructions.)
• Remove the rear cover. (See “Rear Cover Removal” (page 180) for instructions.)
• Remove the top cover. (See “Top Cover Removal” (page 192) for instructions.)
• Remove the left cover. (See “Left Cover Removal” (page 232) for instructions.)
• Remove the upper output delivery roller. (See “Transfer Roller Removal” (page 162)
for instructions.)
2 Push the roller forward and lift the left end out from the seated position (see figure 7-60).
3 Lift the right end of the roller and remove it.
NOTE: Use care when removing rollers. The spring may come out.
4 Repeat steps 2 and 3 for the remaining three rollers.
Figure 7-60 Removing the Lower Output Delivery Roller
To Next Page
Loading...