202 Chapter 7 Removal and Replacement C4170-90959
Transport Belts and Rollers Replacement
Figure 7-66 identifies all of the parts used in this procedure.
Figure 7-66 Transport Belts and Rollers
1 Install the small rollers back in the bottom of the printer (see figure 7-65).
2 Install the A-1 belt and roller back in its carriage as shown in figure 7-67. Perform the
same procedure to install the A-2 belt and roller.
Figure 7-67 Installing the A-1 Belt and Roller
To Next Page
Loading...