ENWW Clearing jams 101
Duplexer area
This procedure applies only to printers that include a built-in duplexer
(HP LaserJet 2300d printer, HP LaserJet 2300dn printer, and
HP LaserJet 2300dtn printer).
1 Remove tray 2 from the printer.
2 Pull the green lever on the left front of the tray 2 opening to open the
paper access plate.
3 Reach in and pull out the jammed paper.
4 Push the bottom of the paper access plate back up until it clicks into
place on both sides (both sides need to be engaged).
5 Reinstall tray 2.
6 To reset the printer and continue printing, open the top cover all the
way and then close it.
Note
If the A
TTENTION light does not go out, jammed media remains inside
the printer. Check the paper-feed and rear-output areas for jams.
1
2
3
4
5
To Next Page
Loading...