Need help?Do you have a question about the HP LaserJet 3020 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 19 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 19 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Fax Resolution | 300 x 300 dpi |
| Connectivity | USB |
| Standard Input Capacity | 250 sheets |
| Standard Output Capacity | 125 sheets |
| Memory | 32 MB |
| Processor Frequency | 230 MHz |
| Monthly Duty Cycle | 7000 pages |
Describes input trays, scanner, parallel, USB ports, and RAM for the device.
Place the device on a sturdy, level surface in a well-ventilated area.
Maintain recommended temperature and humidity ranges for optimal operation.
Details the specific items found within the product box for setup.
Lists Start Guide, Fax Guide, electronic User Guide, and Toolbox Help.
Visual guide to the printer's external components and their labels.
Instructions for aligning and pressing the control panel faceplate into place correctly.
Details the functions of scan, alphanumeric, menu/cancel, and copy controls.
Details fax, alphanumeric, menu/cancel, copy, and scan controls.
Instructions for sliding the tray in, removing tape, and adjusting guides.
Details on placing media, adjusting guides, closing the tray, and installing output bin support.
Align ADF tray tabs with grooves in the lid, then slide tray into place.
Press the print-cartridge-door release to open the door.
Remove cartridge, shake, remove tape, hold by handle, insert, and close door.
Instructions for cleaning toner spills on clothing: wipe, wash cold, air dry.
HP does not recommend non-HP cartridges due to quality control issues.
Connect the power cord to the device and a grounded AC outlet.
Connect parallel or USB cable to the appropriate port on the device.
Connect the fax cord to a telephone jack for fax functionality.
Press the power button next to the power socket to turn on the device.
Check power cord connection to device, outlet, or power strip if device has no power.
Follow prompts to select language and location for control panel.
Steps to print a configuration report via the control panel menu.
Advice on what to do if the printed configuration report is blank.
Load report into ADF and press START/COPY to self-test the copier.
Tips for blank copies: check original loading, paper jams in ADF/path.
Load report face-down on flatbed scanner, close lid, press START/COPY.
Tips for blank scanned copies: check original loading, paper path jams.
Indicates setup is complete for copier-only; directs to network/computer connection or fax setup.
Follow instructions for HP print server connection; proceed to next step.
Close programs, insert CD-ROM, run HPSetup.exe for installation.
Requires administrative privileges for Windows NT, XP, or 2000.
Software prompts to connect the device to a computer via parallel or USB cable.
Connect USB, close programs, insert CD, run installer, follow prompts, restart.
Choose 'Typical' installation and follow on-screen instructions.
Access device functions via Toolbox (not for Macintosh); go to step 25.
Print a page to confirm correct software installation; reinstall if failed.
Register online at hp.com/go/register for device updates, support alerts, and tips.
Register your device at hp.com/go/register for privacy and updates.
Find support flyers or visit hp.com/support for assistance.
Device is ready; use Toolbox to access User Guide and tools.
To Next Page