HP LaserJet 4100 - Page 20

18 Product Information C9148-90909
Media specifications
Note This section refers to the MFP only. See the HP LaserJet 4100 series printer service manual for
printing specifications, or see the Print Media Guide for the HP LaserJet printer family
for general
requirements.
Special considerations for ADF documents
● Documents must be free of tears or perforations.
● Documents must be square or rectangular and in good condition (not fragile or worn).
● Documents must be free of glue, correction fluid, or wet ink.
● Remove sticky notes, tape flags, staples, and paper clips.
● Multipart forms cannot be used in the ADF.
Supported media for the glass
The glass can accommodate the following types of media:
● letter- or A4-size and smaller originals, books, manuals, receipts, and similar documents
● irregular and worn documents, stapled documents, and photographs
● multiple-page letter-size documents
Table 5. Supported paper sizes and weights for the ADF
Size Dimensions Weight
Letter 216 by 279 mm
(8.5 by 11 inches)
50 to 105 g/m
2
(13 to 28 lb)
A4 210 by 297 mm
(8.3 by 11.7 inches)
Legal 216 by 356 mm
(8.5 by 14 inches)
Custom sizes Minimum:
148.5 by 210 mm
(5.9 by 8.3 inches
Maximum:
215.9 by 355.6 mm
(8.5 to 14 inches)
60 to135 g/m2
(16 to 36 lb)