38 Maintenance C9148-90909
Figure 14. Remove the clear plastic sheet
4 Use a clean, soft, dry cloth to wipe the surface of the clear plastic sheet (do not use an
ammonia based cleaner.
5 Reinstall the clear, plastic sheet by sliding its leading edge under the gray ribbed guide
(callout 2), which is located under the white padded sheet.
6 Align the holes in the sheet with the small plastic spindles (callout 3) in the delivery guide.
Press the clear, plastic sheet down onto the spindles.
Figure 15. Replace the clear, plastic sheet
Note Make sure that the free end of the clear, plastic sheet (part number RB2-8793-000CN) is tucked
behind the gray ribbed guide and the white padded sheet.
7 Close the delivery-guide cover. The cover is properly closed when you hear the delivery-
guide cover plastic handles click into place.
8 Wipe the outside surface of the delivery guide with the cloth.
1
2
3
To Next Page
Loading...
