EN
Environmental product stewardship program
247
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
Hewlett-Packard Company
Manufacturer’s Address:
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product
Product Name:
HP LaserJet 4100 / 4100N / 4100TN / 4100DTN / 4100SE
Model Numbers:
C8049A / C8050A / C8051A / C8052A / C8048A
Product Options:
ALL
conforms to the following Product Specifications:
Safety: IEC 950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4+A11
IEC 825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 Laser/LED Product
EMC: CISPR 22:1997 / EN 55022:1998 Class B
1
EN 61000-3-2:1995
EN 61000-3-3:1995
EN 55024: 1998
FCC Title 47 CFR, Part 15 Class B
2
/ ICES-002, Issue 2
AS / NZS 3548:1995
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low
Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly:
1. The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
3. Product exhibits Class A operation when connected to Local Area Network (LAN) cables using print
server accessories.
Boise, Idaho, USA
February 2001
For regulatory topics ONLY, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41
Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-
Packard Gmbh, Department HQ-TRE / Standards Europe,
Herrenberger Straße110-140, D-71034 Böblingen (FAX: +49-7031-
14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box
15, Mail Stop 160, Boise, ID 83707-0015 (Phone: 208-396-6000)
To Next Page
Loading...
