48 Chapter 2 - Printing tasks
EN
3 Load paper into the tray.
4 Make sure the paper is flat in the tray
at all four corners and below the
front and back tabs.
5 Slide the tray back into the printer.
Note
If the tray is not properly adjusted, the
printer might display an error message
or paper might jam.
For paper orientation when you are
printing on both sides, see “Printing both
sides of paper (optional duplexer)” on
page 49. For information on loading
special paper, see “Printing special
paper” on page 53.
3
5
4
To Next Page
Loading...
