HP LaserJet 4250 Series - Replacing the stapler unit

9. The settings are saved and the control panel returns to the DATE/TIME submenu.
10. Press M
ENU to exit the menu.
Setting the time format
1. Press M ENU to open the menus.
2.
Use
(U P button) or (D OWN button) to scroll to CONFIGURE DEVICE, and then press
(S ELECT button).
3.
Use
(U P button) or (D OWN button) to scroll to SYSTEM SETUP, and then press
(S ELECT button).
4.
Use
(U P button) or (D OWN button) to scroll to DATE/TIME, and then press (S ELECT
button).
5.
Use
(U P button) or (D OWN button) to scroll to TIME FORMAT, and then press
(S ELECT button).
6.
Use
(U P button) or (D OWN button) to scroll to the desired time format, and then press
(S ELECT button).
7. The settings are saved and the control panel returns to the DATE/TIME submenu.
8. Press M
ENU to exit the menu.
Setting the time
1. Press M ENU to open the menus.
2.
Use
(U P button) or (D OWN button) to scroll to CONFIGURE DEVICE, and then press
(S ELECT button).
3.
Use
(U P button) or (D OWN button) to scroll to SYSTEM SETUP, and then press
(S ELECT button).
4.
Use
(U P button) or (D OWN button) to scroll to DATE/TIME, and then press (S ELECT
button).
5.
Use
(U P button) or (D OWN button) to scroll to TIME, and then press (S ELECT button).
6.
Use
(U P button) or (D OWN button) to scroll to the appropriate hour, and then press
(S ELECT button).
7.
Use
(U P button) or (D OWN button) to scroll to the appropriate minute, and then press
(S ELECT button).
8. The settings are saved and the control panel returns to the DATE/TIME submenu.
9. Press M
ENU to exit the menu.
ENWW Setting the real-time clock 101