Orientation of paper when a stapler is installed
When an optional stapler/stacker is installed, the printer automatically rotates the printed
images 180° on all paper sizes, even if the job is not stapled. If you are printing on paper
that requires a specific orientation, such as letterhead, preprinted paper, prepunched paper,
and paper with watermarks, make sure that the paper is loaded correctly in the tray. The
correct orientation of the paper in the trays is shown below.
1 2
1 Tray 1, single-sided print jobs
2 All other trays, single-sided print jobs
For single-sided printing and stapling from tray 1, load the paper with the front side facing up
and the top edge toward you. For single-sided printing and stapling from all other trays, load
the paper with the front side facing down and the top edge toward the printer.
1 2
1 Tray 1, duplex print jobs
2 All other trays, duplex print jobs
For duplex (two-sided) printing and stapling from tray 1, load the paper with the front side
facing down and the top edge toward the printer. For duplex printing and stapling from all
other trays, load the paper with the front side facing up and the top edge toward you.
56 Chapter 2 Printing tasks ENWW
To Next Page
Loading...