Item Values Explanation
YES NO: Up to 78 10-pitch characters can be printed on one line
YES: Up to 80 10-pitch characters can be printed on one line
PRINT PS
ERRORS
*OFF
ON
Use this item to select whether or not a PS error page prints
or not.
OFF: PS error page never prints
ON: PS error page prints when PS errors occur
PRINT PDF
ERRORS (HP LaserJet
4250/4350 only)
*OFF
ON
Use this item to select whether or not a PDF error page
prints or not.
OFF: PDF error page never prints
ON: PDF error page prints when PDF errors occur
PCL
FORM LENGTH
ORIENTATION
FONT SOURCE
FONT NUMBER
FONT PITCH
FONT POINT SIZE
(HP LaserJet 4250/4350
only)
SYMBOL SET
APPEND CR TO LF
SUPPRESS BLANK PAGES
MEDIA SOURCE MAPPING
FORM LENGTH: Use this option to set vertical spacing from
5 to 128 lines for default paper size.
ORIENTATION: Use this option to select default page
orientation to portrait or landscape.
FONT SOURCE: Allows you to select the font source as
*Internal, CARD SLOT 1, 2, or 3, Internal disk, or EIO disk.
FONT NUMBER: The printer assigns a number to each font
and lists the numbers on the PCL Font List. The range is 0
to 999.
FONT PITCH: Use this option to select the font pitch. This
item might not appear, depending on the font selected. The
range is 0.44 to 99.99.
FONT POINT SIZE: Use this option to select the font point
size. This appears only if a font with a scalable point size is
selected as the default font. The range is 4.00 to 999.75.
SYMBOL SET: Use this option to select any one of several
available symbol sets at the printer control panel. A symbol
set is a unique grouping of all the characters in a font. PC-8
or PC-850 is recommended for line-draw characters.
APPEND CR TO LF: Select YES to append a carriage
return to each line feed encountered in backward-compatible
PCL jobs (pure text, no job control). Some environments,
such as UNIX, indicate a new line by using only the line-feed
control code. Use this option to append the required carriage
return to each line feed.
SUPPRESS BLANK PAGES: When generating your own
PCL, extra form feeds are included that would cause a blank
page(s) to be printed. Select YES for form feeds to be
ignored if the page is blank.
MEDIA SOURCE MAPPING: Use this element to select
between classic or standard media source mapping.
70 3 Operation
To Next Page
Loading...