Printing from tray 2
When the dc controller PCA receives print command, the main motor (M101) and scanner motor
start their rotation. When the main motor reaches its prescribed speed, the feed-roller clutch (CL101)
and tray 2 pickup solenoid (SL101) are activated. (The main motor rotation drives the tray 2 pickup
roller, tray 2 feed roller, tray 2 separation roller, and paper-feed rollers.)
The pickup solenoid activates the tray 2 pickup roller, which rotates once and picks up the media in
the tray. The separation roller prevents additional sheets from feeding with the first sheet, and the
media is fed to the pre-feed sensor (PS102).
When the sheet reaches the registration assembly, its skew is corrected. The sheet then passes
through the transfer, separation, and fusing stages, and through the delivery unit, and then is
delivered to the output bin.
Figure 5-16 Tray 2 timing
Pickup, feed, and delivery system 107
To Next Page
Loading...