Transfer roller
1 Remove the print cartridge. See Print cartridge.
CAUTION Do not touch the black rubber on the transfer roller. Skin oils on the roller can
cause print-quality problems. Use disposable gloves when you remove the transfer roller.
2 Use a flat-blade screwdriver to lift the left end of the metal shaft out of place (near the blue gear).
Slide the transfer roller to the left to remove it.
NOTE When you install the transfer roller, make sure that the black collar on the left side
is oriented correctly, with the open end face-down (the solid end is face-up).
Figure 6-4 Remove the transfer roller
150 6 Removal and replacement
To Next Page
Loading...