Tray 2, 3, 4, or 5 pickup and feed rollers
1 Remove the cassette from the tray.
2 Pinch the roller latch (callout 1) to release the roller, and then slide the roller off of the shaft.
Figure 6-22 Remove the tray 2, 3, 4, or 5 pickup and feed rollers (1 of 2)
3 Open the jam-access door. Pinch the roller latch to release the roller, and then slide the roller off
of the shaft.
Figure 6-23 Remove the tray 2, 3, 4, or 5 pickup and feed rollers (2 of 2)
User-replaceable parts 161
To Next Page
Loading...