Engine power supply
1 Remove the following assemblies:
● Fuser. See
Fuser.
● Output-bin assembly. See
Output-bin assembly.
● Duplex-printing unit (or the cover if no duplex-printing unit is installed). See
Duplex-printing
unit.
● Front cover. See
Front cover.
● Back cover. See
Back cover.
● PFC power supply. See
Power-factor-correction (PFC) power supply.
2 Remove two screws (callout 1), and remove the fan shroud.
Figure 6-149 Remove the engine power supply (1 of 10)
Internal assemblies 239
To Next Page
Loading...