3 Release the ADF white mylar-backing locking tab, and lift the assembly up and out of the ADF.
Figure 6-206 Remove the ADF white mylar-backing (3 of 3)
NOTE The springs behind the ADF white mylar-backing assembly are not captive. Do
not lose the springs when you remove the ADF white mylar-backing assembly.
4 Reinstallation tip: When you reinstall the ADF white mylar-backing assembly, compress and
twist the springs to make sure that they grip the pedestals on the back of the assembly.
Figure 6-207 Reinstall the ADF white mylar-backing springs
ADF components 279
To Next Page
Loading...