ADF leading-edge and paper-present sensors
1 Remove the ADF jam-access cover. See ADF jam-access cover and latch.
2 Locate the ADF leading-edge sensor (callout 1) and the ADF paper-present sensor (callout 2).
Figure 6-216 Remove the ADF leading-edge and paper-present sensors (1 of 2)
3 Squeeze the retainer tabs, and push the sensor out of the mounting frame. Disconnect the
connector, and then remove the sensors
Figure 6-217 Remove the ADF leading-edge and paper-present sensors (2 of 2)
286 6 Removal and replacement
To Next Page
Loading...