500-sheet-feeder paper-size switch
1 Remove the 500-sheet-feeder PCA. See 500-sheet-feeder PCA.
2 Remove the cassette. Remove four screws (callout 1), release one locking tab (callout 2), and
then push the plastic grounding-spring bracket (callout 3) into the feeder.
NOTE The grounding spring is not captive. Do not lose the spring when you remove the
paper-size switch.
Figure 6-232 Remove the 500-sheet-feeder paper-size switch (1 of 2)
300 6 Removal and replacement
To Next Page
Loading...