500-sheet-feeder jam-access-cover-open switch
1 Remove the 500-sheet number plate. See 500-sheet-feeder number-plate assembly.
2 Remove two screws (callout 1), and then remove the sensor cover.
1
Figure 6-234 Remove the 500-sheet-feeder jam-access-cover-open switch (1 of 2)
3 Remove one screw (callout 2), and then remove the sheet-metal sensor-mounting bracket.
Remove the sensor from the bracket.
Figure 6-235 Remove the 500-sheet-feeder jam-access-cover-open switch (2 of 2)
302 6 Removal and replacement
To Next Page
Loading...