Clearing jams from the tray 1 area
Use this procedure to clear jams that occur in the tray 1 input area.
To clear jams from the tray 1 area
1 Open the top cover, open tray 1, and remove the print cartridge.
2 Use the green handle to lift the paper-access plate.
3 Slowly pull any jammed media out of the MFP. Do not tear the media. If part of the sheet has
already been pulled into the MFP, follow the steps for
Clearing jams from the top-cover and print-
cartridge areas.
4 If jammed media is difficult to remove, remove the envelope-entrance cover. If media is present,
remove it.
Jams 341
To Next Page
Loading...