Light print (partial page)
Table 7-13 Light print (partial page)
Possible cause Solution
1 The print cartridge is not installed correctly. Remove the print cartridge and then reinstall it. The
top cover should close completely when the cartridge
is fully seated.
2 The toner supply is low or the toner cartridge
developer is defective.
1 Shake the print cartridge gently to redistribute the
toner.
2 Replace the cartridge.
3 The transfer roller is worn or contaminated or
maintenance might due.
Print a supplies status page and look at the
maintenance-kit gauge. If maintenance is due, install
a maintenance kit. For information about ordering a
maintenance kit, see chapter 8.
Image-formation troubleshooting 367
To Next Page
Loading...