Vertical lines (ADF)
Possible cause Solution
1 The ADF is dirty. Clean the ADF. See Cleaning the ADF delivery system.
If the mylar strip is dirty or worn, replace it.
Replacement mylar strips are stored in an envelope
that is underneath the white, vinyl ADF backing.
Follow the instructions that are in the envelope.
2 The scanner needs to be calibrated. Calibrate the scanner. See Calibrating the scanner.
3 The ADF pickup roller is dirty. Clean the ADF pickup roller. See Cleaning the ADF
delivery system. Replace the roller if necessary. See
ADF pickup and feed rollers.
390 7 Troubleshooting
To Next Page
Loading...