Using the HP Toolbox
The HP Toolbox is a Web-browser-based software program that you can use for the following tasks:
■ Check the MFP status.
■ Configure the MFP settings.
You can view the HP Toolbox when the MFP is connected to a TCP/IP-based network. You must
perform a complete (custom) software installation in order to use the HP Toolbox.
NOTE You do not have to have Internet access to open and use the HP Toolbox. However,
if you click a link in the Other Links area, you must have Internet access to go to the site that
is associated with the link. See
Other links for more information.
Supported operating systems
The HP Toolbox is supported for the following operating systems:
■ Windows 98, Windows 2000, Windows Me, Windows XP, and Windows Server 2003 (32-bit only)
■ Mac OS X, Version 10.2 or later (the MFP must be set up by using Rendezvous or TCP/IP)
Supported browsers
To use the HP Toolbox, you must have one of the following browsers:
Windows
■ Microsoft Internet Explorer 5.5 or later
■ Netscape Navigator 7.0 or later
■ Opera Software ASA Opera 7.0 or later
Mac (OS X only)
■ Microsoft Internet Explorer 5.1 or later
■ Netscape Navigator 7.0 or later
Tools for troubleshooting 407
To Next Page
Loading...