Moving the MFP
Before moving the MFP, be sure to lock the scanner. The scanner lock is underneath the scanner lid,
to the left of the scanner glass.
NOTE After moving the MFP, unlock the scanner. The MFP cannot initialize correctly when
the scanner is locked.
The MFP is heavy and should be lifted by three people. One person should stand at the front of the
MFP and should grip the sides, and the other two people should stand at the sides of the MFP and
should grip the sides and back. Remove the output bin or other optional output accessories before
moving the MFP. To lift the MFP, grip the lift handles that are on the sides and on the back of the
MFP. Do not attempt to lift the MFP by gripping any other part of the MFP. If the bottom of the MFP
is attached to an optional accessory (such as a 500-sheet feeder or a storage cabinet), the
accessory latches must be unlocked before moving the MFP.
WARNING! To prevent possible injury to yourself or damage to the MFP, separate the MFP
from any currently installed optional accessories (for example an optional feeder or a stapler/
stacker) before lifting the MFP.
CAUTION When placing the MFP onto the 500-sheet feeder, be sure to place it directly over
the alignment pins.
Locking and unlocking optional accessories
For more stability to prevent the MFP from tipping over, the optional 500-sheet feeders and the
cabinet are automatically locked to the bottom of the MFP. When accessories are installed, verify
that the lock on each accessory is in the rear (locked) position.
To unlock the accessories, slide the lever to the forward (unlocked) position.
14 1 Product information
To Next Page
Loading...