1 Device Information lists the serial number, page counts, firmware datecodes, maintenance-kit counts, and other
information for the MFP.
2 Installed Personalities and Options lists all MFP languages that are installed (such as PCL and PS), and lists
options that are installed in each DIMM slot and EIO slot.
3 Memory lists the MFP memory information, PCL Driver Work Space (DWS), and I/O buffering and Resource
Saving information.
4 Event Log lists the number of entries in the log, the maximum number of entries viewable, and the last three
entries. The second page of the event log is the manufacturer page. This page contains information that might
assist HP Customer Care representatives in solving possible MFP problems.
5 Security lists the status of the control-panel lock, control-panel password, and disk drive.
6 Paper Trays and Options lists the size settings for all trays and lists paper-handling accessories that are installed.
NOTE The content of the configuration page varies, depending on the options that are
currently installed in the MFP.
Tools for troubleshooting 413
To Next Page
Loading...