4 Touch DATE/TIME.
5 Touch TIME FORMAT.
6 Touch the appropriate format. The settings are saved and the control panel returns to the DATE/
TIME submenu.
7 Touch EXIT to exit the menu.
To set the time
1 Press M
ENU
.
2 Scroll to and touch CONFIGURE DEVICE.
3 Scroll to and touch SYSTEM SETUP.
4 Touch DATE/TIME.
5 Touch TIME.
6 Touch the appropriate options to set the correct hour, minute, and AM/PM setting.
NOTE The order of modifying the hour, minute, and AM/PM setting depends upon the
time-format setting.
7 The settings are saved and the control panel returns to the DATE/TIME submenu.
8 Touch EXIT to exit the menu.
Setting the wake time
Use the wake time feature to wake the MFP at a set time each day. If a wake time is set, use an
extended sleep-delay period. See
Setting the sleep delay.
To set the wake time
1 Press M
ENU
.
2 Scroll to and touch CONFIGURE DEVICE.
3 Scroll to and touch SYSTEM SETUP.
4 Touch WAKE TIME.
5 Touch the day of the week for which you want to set the wake time.
6 Touch CUSTOM.
7 Touch the appropriate options to set the correct hour, minute, and AM/PM setting.
8 If you want to wake the MFP at the same time each day, on the APPLY TO ALL DAYS screen,
touch YES.
-or-
If you want to set the time for individual days, touch NO, and repeat the procedure for each day.
Setting the real-time clock 69
To Next Page
Loading...