HP LaserJet 4L - Page 86

Installation and Configuration
Printing a Self Test
The LaserJet 4MIJ4P/4MP Self Test Fields
o
The numbered items below refer to the Service Mode PCL
Configuration Self Test Page shown in Figure 3-7.
1.
●
2.
3.
4.
5.
6.
‘7.
8.
a
9.
Menu Selections: Shows the current selections for all Service
menu and user menus in the order that they appear in the
control panel display (refer to the Menu Maps, Figures 3-4 and
3-5). Use this information to verify the various menu selections.
PS Menu: Appears on the LaserJet 4P only if the Adobe
PostScript SIMM is installed.
LocalTalk Information: LaserJet 4MP only. Lists the
cotilgured network name and node identification number.
EconoMode Status: Shows current status, ON or OFF.
Formatter Numbefi Shows the Formatter PCA’S serial
number.
RAM Size: Shows how much memory is installed in the
printer. 2048 Kbytes is standard. If optional memory has been
added, a self test can be used to verify installation.
Page Count: Shows how many pages have been printed over
the life of the printer.
Firmware Datecode: Shows the datecode of the installed
firmware (in YYYYMMDD format).
Installed Options/Personalities: Lists recognized cartridges
and personalities. Use to verify installation.
10.REt Status: Shows the current Resolution Enhancement
m
setting, LIGHT, MEDIUM, DARK or OFF. (Default is
MEDIUM.)
11.Sample Printi Shows ripple print pattern (always in Courier).
●
This area is useful for checking print density and quality.
3-23