Step 13. Install the Printing Software
Before you use this printer with your software applications, you must
install printing software. (Please review the “HP Software Product
License” in Appendix F of the User’s Manual.) For more information on
software components see Chapter 2 of the User’s Manual.
Note
If you use DOS programs also, see the following page.
Installing the MS Windows Printing System
The installation program for the MS Windows Printing System will install all
of the components needed for printing in a MS Windows environment
(version 3.1 and later).
Locate the disks titled HP LaserJet 5 Printing System for Microsoft®
Windows, and insert Disk 1 into drive A.
For Windows 3.1
1 Close all running applications. In the Windows Program Manager
screen, pull down the
File menu.
2 Select the Run command.
3 Type A:SETUP in the command line box and click OK on the screen or
press Enter on your keyboard.
4 Follow the instructions on the screen to complete the installation.
For Windows 95
1 Click on Start. Select Settings. Select Printers.
2 Double Click on Add Printer.
3 Follow the instructions on the screen to complete the installation.
Note
Network utilities, such as JetAdmin are available through the Custom
Setup option during software installation.
18 Getting Started Guide EN
To Next Page
Loading...