Installation Checklist
Congratulations on your purchase of the HP LaserJet 5 Printer!
This Getting Started Guide will help you set up and install your new
printer. Complete, in order, the steps in the checklist. Each step is
detailed on the following pages with easy-to-follow directions.
I
Installation Checklist
Step 1. Check the package contents. Page 2
Step 2. Remove the internal packaging. Page 3
Step 3. Prepare a location for the printer. Page 5
Step 4. Locate the printer parts. Page 6
Step 5. Install the toner cartridge. Page 9
Step 6. Load paper into Tray 2. Page 10
Step 7. Load paper into Tray 1. Page 11
Step 8. Attach the power cord. Page 12
Step 9. Change the language (optional). Page 13
Step 10. Test the printer operation. Page 14
Step 11. Select a printer interface and cable. Page 15
Step 12. Attach a cable. Page 17
Step 13. Install the printing software. Page 18
Step 14. Test printer to verify setup is complete. Page 20
A list of common questions is located at the back of this guide for help
in problem solving with printer and software setup.
EN Getting Started Guide 1
To Next Page
Loading...
Need help?
General
