12 Printer Setup ENWW
Step 5. Install accessories
WARNING! This printer weighs approximately 63.5 kg (140 lb). HP recommends that four people move it to
avoid injury to you and damage to the printer.
Install any paper-handling accessories that you purchased with the printer or separately. Use the
installation instructions that are packaged with the accessories. The instructions might be on a
CD-ROM.
Install duplexer
Note If you purchased an output device (the multifunction finisher, the 3,000-sheet stacker, the 3,000-
sheet stacker/stapler, or the 8-bin mailbox) along with a duplexer and an input device (Tray 4 and/
or Tray 1), install the duplexer and the input device(s) before trying to install the output device.
Refer to the installation instructions that are included with the duplexer. The instructions might be
on a CD-ROM.
Duplexer
Note After you have installed the duplexer, return to this guide to complete the printer setup.
Install input device(s)
Refer to the installation instructions that are included with the input device(s). The instructions
might be on a CD-ROM.
Tray 1 and Tray 4
To Next Page
Loading...