Message Description
OFF: You must manually configure the speed and mode using the Jetdirect integrated
menu from the printer's control panel. If Auto-negotiation is off, the settings must match
those of the network for proper operation.
MANUFACTURING ID:
The manufacturing identification code for use by HP online support personnel.
BUILD DATE: Identifies the date of manufacture of the HP Jetdirect print server.
Security Settings
Information in this section of the Jetdirect configuration page is described in Table 7-2 Security
Settings.
Table 7-2 Security Settings
Message Description
Admin Password:
Specifies whether an IP Administrator password has been configured on the print
server. This password is shared by Telnet, the embedded Web server, and HP Web
Jetadmin to control access to print server configuration parameters. Up to 16 case-
sensitive, alphanumeric characters can be used.
Not Set: An Administrator password has not been set.
Set: An Administrator password has been set.
(The password may be cleared from the print server through a cold reset.)
SNMP Versions:
Specifies the SNMP versions enabled on the print server.
Disabled: All SNMP versions are disabled on the print server. No SNMP access is
allowed.
1;2: SNMP v.1 and SNMP v.2c are supported.
SNMP Set Cmty Name:
Specifies whether an SNMP set community name has been configured on the HP
Jetdirect print server. An SNMP set community name is a password for write access to
SNMP control functions (SNMP SetRequests) on the HP Jetdirect print server.
Not Specified: An SNMP set community name has not been set.
Specified: A user-specified SNMP set community has been set.
Access List:
Identifies whether a host access control list is configured on the HP Jetdirect print
server. A host access control list specifies the IP address of individual systems, or IP
network of systems, that are allowed access to the print server and device.
Specified: A host access list is configured on the HP Jetdirect print server.
Not Specified: A host access list is not configured on the print server. All systems are
allowed access.
Network Statistics
Information in this section of the Jetdirect configuration page is described in Table 7-3 Network
Statistics.
Table 7-1 HP Jetdirect Configuration (continued)
76 Chapter 7 HP Jetdirect Configuration Page ENWW
To Next Page
Loading...