Figure 3-11 Configure Security Settings screen – 2 of 2
5
6
7
8
9
Callout Area on the screen Information or capability that the area
provides
1 Device Password Use this feature to set your password
using a maximum of 16 characters. The
device password allows you to control
who can access and change device
settings.
To assign or change the device
password:
1. If the device currently has a
password assigned, type the
current device password in the Old
Password text box.
2. Leave the New Password and
Verify Password text boxes blank.
3. Type the same device password in
the Verify Password text box.
4. Click Apply at the bottom of the
page.
5. An authorization dialog box
appears. Use the new password to
re-authenticate to the device.
ENWW Security 39
To Next Page
Loading...
