HP Laserjet,Color Laserjet CM6030 - Page 65

4. Under the Searching the Database section, perform the following steps.
a. Type in the Search Prefix into the Search Root field.
b. Select an option from the three options on the Device user information retrieval method
drop-down menu. The appropriate choice depends on your network environment.
◦
Select Exchange 5.5 Defaults when Exchange 5.5 servers are used in LDAP
addressing.
◦
Select Active Directory Defaults for Windows 2000 or later network environments.
◦
Select Custom for specialized network environments.
5. Click Apply.
When you have finished these steps, continue with the steps in the next section,
Use the MFP control
panel for Kerberos Authentication on page 53.
Use the MFP control panel for Kerberos Authentication
Follow these steps to finish configuring Kerberos Authentication for your product.
1. At the MFP, touch any option on the main screen of the control panel. The screen displays a request
for authentication.
NOTE: Remember the username is defined within the device user DN value in the LDP trace and
is often your entire e-mail address, including the @xx.xx.
2. Use the touch screen keypad on the MFP control panel to input the authentication, and then touch
OK. The chosen option appears, for example, e-mail.
ENWW Kerberos Authentication 53