Supported paper types
Table 7-4 Tray 1 paper information
Type Specifications Quantity Driver settings Paper orientation
Paper and cardstock,
standard sizes
Range:
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Equivalent to 100
sheets of 75 g/m
2
(20
lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing down, with the
top edge leading into
the tray, or toward the
back of the product
Envelopes
Less than 60 g/m
2
(16
lb) bond to 90 g/m
2
(24
lb) bond
Up to 10 envelopes Envelope Short edge leading,
flap toward the front of
the product, facing up
Labels Maximum 0.23 mm
(0.009 in) thick
Maximum stack height:
10 mm (0.6 in)
Labels Side to be printed on
facing down
Transparencies Minimum 0.13 mm
(0.005 in) thick
Maximum stack height:
10 mm (0.6 in)
Transparencies Side to be printed on
facing down
Heavy 0.13 mm (0.005 in)
thick
Maximum stack height:
10 mm (0.6 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing down
Glossy Range:
75 g/m
2
(20 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing down
Photo media
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Cut sheet paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Tough paper
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
10 mm (0.6 in)
Side to be printed on
facing down
Table 7-5 Trays 2, 3, 4, and 5 paper information
Type Specifications Quantity Settings Paper orientation
Paper and cardstock,
standard sizes
Range:
60 g/m
2
(16 lb) bond to
220 g/m
2
(58 lb) bond
500 sheets of 75 g/m
2
(20 lb) bond.
Plain or unspecified Load preprinted or
prepunched paper
facing up, with the top
toward the back of the
tray or toward the right-
hand side of the tray.
Labels Maximum 0.13 mm
(0.005 in) thick
Maximum stack height:
54 mm (2.1 in)
Labels Side to be printed on
facing up
Transparencies Minimum 0.13 mm
(0.005 in) thick
Maximum stack height:
54 mm (2.1 in)
Transparencies Side to be printed on
facing up
Heavy 0.13 mm (0.005 in) thick Maximum stack height:
54 mm (2.1 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing up
Glossy
75 g/m
2
(20 lb) bond to
220 g/m
2
(58 lb) bond
Maximum stack height:
54 mm (2.1 in)
Light glossy, glossy, or
heavy glossy
Side to be printed on
facing up
100 Chapter 7 Paper and print media ENWW
To Next Page
Loading...
