Replace supplies
When you use genuine HP supplies, the product automatically notifies you when supplies are nearly
depleted. The notification to order supplies allows ample time to order new supplies before they need
to be replaced. For more information about ordering supplies, see
Supplies and accessories
on page 279
Locate supplies
Supplies are identified by their labeling and their blue plastic handles.
The following figure illustrates the location of each supply item.
Figure 14-1 Supply item locations
1
2
3
4
5
6
1 Image drums
2 Print cartridges
3 Document feeder kit
4 Fuser
5 Transfer unit
6 Transfer roller
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
product.
●
Allow sufficient space in the front and on the right side of the product for removing supplies.
●
The product should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply item or see
more information at
www.hp.com/go/cljcm6030mfp_software or www.hp.com/go/
cljcm6040mfp_software. When you connect, select Solve a Problem.
194 Chapter 14 Manage and maintain the product ENWW
To Next Page
Loading...
