WARNING! To avoid electrical shock, remove any necklaces, bracelets, or other metal items before
reaching into the inside of the product.
Type of jam Procedure
13.JJ.NT Jam below control panel See AREA 1: Clear jams in the output bin on page 230.
13.JJ.NT Fuser Area Jam
13.JJ.NT Fuser Wrap Jam
13.JJ.NT Transfer And Fuser Jam
See AREA 2: Clear jams in the fuser on page 232.
13.JJ.NT Jam Inside Right Door See Clear jams in the duplex area on page 236.
13.JJ.NT Jam In Tray 2
13.JJ.NT Transfer Area Jam
See AREA 5: Clear jams in Tray 2 and the internal paper path
on page 239.
13.JJ.NT Jam In Tray 1 See AREA 6: Clear jams in Tray 1 on page 242.
13.JJ.NT Jam In Tray 3
13.JJ.NT Jam In Tray 4
13.JJ.NT Jam In Tray 5
13.JJ.NT Jam Inside Lower Right Door
13.JJ.NT Jam In Input Accessory
See AREA 7: Clear jams in optional Trays 3, 4, and 5
on page 245
13.JJ.NT Jam In Left Accessory See AREA 8: Clear jams in the optional finishing devices
on page 248.
Jam in document feeder See AREA 9: Clear jams in the ADF on page 252.
AREA 1: Clear jams in the output bin
1. If jammed paper is visible in the output bin, gently pull the paper to remove it.
230 Chapter 15 Solve problems ENWW
To Next Page
Loading...
