5. Touch Print.
6. Find the most recent event in the log.
●
If the event is a 54.OE.01 Media Sensor event, you need to replace the registration second
transfer assembly. Contact HP Support at
www.hp.com/go/cljcm6030mfp_software or
www.hp.com/go/cljcm6040mfp_software and provide them with this error code.
●
If the event is a 54.OE.02 Media Sensor event, you need to replace the product transfer kit.
Contact HP Support at
www.hp.com/support/cljcm6040mfp or www.hp.com/support/
cljcm6030mfp and provide them with this error code.
●
If the event is a 54.OE.03 Media Sensor event, you need to clean the registration second
transfer assembly and the media sensor using the following procedure.
Clean the registration second transfer assembly
1. Open the right door.
2. Locate and remove the cleaning brush.
268 Chapter 15 Solve problems ENWW