Default Job Options menu
Administration > Default Job Options
Use this menu to define the default job options for each function. These are used if the user does not
specify other options when creating the job.
Default Options for Originals
Administration > Default Job Options > Default Options For Originals
Table 2-2 Default Options for Originals menu
Menu item Values Description
Paper Size Select a paper size from the list. Select the paper size that is most often used for copy or scan
originals.
Number of Sides 1 Select whether copy or scan originals are most often single-sided or
double-sided.
2
Orientation Portrait Select the orientation that is most often used for copy or scan
originals. Select Portrait if the short edge is at the top or select
Landscape if the long edge is at the top.
Landscape
Optimize Text/Picture Manually Adjust Optimize the output for a particular type of original: text, pictures, or
a mixture of both.
If you select Manually Adjust, specify the mix of text and pictures that
is used most often.
Text
Printed Picture
Photograph
20 Chapter 2 Control panel ENWW
To Next Page
Loading...
