To Next PageTo Next Page
Need help?Do you have a question about the HP LaserJet CP2020 Series and is the answer not in the manual?
Legal terms and copyright information for the product.
Compliance with Federal Communications Commission rules for digital devices.
Select a suitable, well-ventilated, and dust-free location for the printer.
Remove packaging and shipping materials from the printer.
Insert the installation CD and follow the on-screen instructions.
Remove all orange shipping tape from the product before use.
Get the print cartridges ready for installation into the printer.
Load paper into the appropriate paper tray.
Adjust paper guides to fit the loaded paper and reinsert the tray.
Connect the power cord and turn on the printer.
Set language and location on the control panel if necessary.
Choose the correct setup step based on operating system and connection type.
Install software and connect the printer via USB.
Connect the printer to the network using a network cable.
Print a configuration page to obtain the IP address for network setup.
Manually assign an IP address if required for network configuration.
Install printer software for network-connected printers.
Install and configure the printer for Mac operating systems.
Access to the electronic user guide and support resources.
Detailed explanation of the printer's control panel components and indicators.
General