30.01.23 Scanner calibration failure ........................................ 253
30.01.36 Upgrade Error Try downloading upgrade again .......... 254
30.01.43 Scan memory failure To continue turn off then on ......... 254
30.01.YY Scanner failure To continue turn off then on ................. 254
30.WX.YZ Scanner fan failure To continue turn off then on .......... 255
31.01.03 Document feeder pick error ....................................... 255
31.01.47 Document feeder not detected .................................... 256
31.03.22 Scanner calibration failure ........................................ 256
31.WX.10 Scanner failure To continue turn off then on ................ 256
31.WX.15 Jam in document feeder ........................................... 256
32.1C.XX ............................................................................... 257
32.21.00 ............................................................................... 261
33.02.01 ............................................................................... 261
33.WX.YZ Used board/disk installed ........................................ 262
40.00.01 USB I/O buffer overflow To continue, touch “OK” ........ 262
40.00.02 Embedded I/O buffer overflow To continue, touch “OK” 262
41.03.YZ Unexpected size in Tray <X> ..................................... 262
41.03.YZ Unexpected size in Tray <X> To use another tray, touch
"Options" ............................................................................... 263
41.05.YZ Unexpected type in Tray <X> ..................................... 263
41.05.YZ Unexpected type in Tray <X> To use another tray,
touch "Options" ...................................................................... 264
41.WX.YZ Error To use another tray, touch "Options" ................. 266
42.XX.YY ............................................................................... 267
47.FC.YZ Printer calibration failed To continue, touch “OK” ......... 267
47.WX.YZ Printer calibration failed ........................................... 268
48.01.XX Error ....................................................................... 268
49.XX.YY Error To continue turn off then on ................................ 268
50.WX.YZ Fuser error To continue turn off then on ...................... 269
51.00.YY Error To continue turn off then on ................................ 272
52.00.00 Error To continue turn off then on ............................... 273
52.00.20 Error To continue turn off then on ............................... 274
52.20.00 Error To continue turn off then on ............................... 274
52.<XX>.00 Error To continue turn off then on ............................ 275
54.XX.YY Error ....................................................................... 275
55.XX.YY DC controller error To continue turn off then on ............ 276
55.XX.YY DC controller error To continue turn off then on ............ 277
56.00.01 Illegal Input Printer Error To continue turn off then on .... 277
56.00.YY Error To continue turn off then on ................................ 278
57.00.0X Error ....................................................................... 278
58.00.04 Error To continue turn off then on ............................... 279
x ENWW
To Next Page
Loading...