Recommended action
98.00.01 or 98.00.02 or 98.00.03
1. Turn the product off and then on.
2. Use the Clean disk item in the Preboot menu.
3. Reload the firmware.
98.00.04
1. Turn the product off and then on.
2. Rerun the file erase function.
<Binname> full Remove all paper from bin
Description
The specified output bin is full.
Recommended action
Empty the bin to continue printing.
<Supply> almost full
Description
Toner Collection bottle is almost full.
◦
10.31.60 (event code)
Toner collection unit
Recommended action
Replace the toner collection unit.
<Supply> low
Description
Toner cartridges are at the very low condition.
◦
Black toner cartridge
◦
Cyan toner cartridge
◦
Magenta toner cartridge
◦
Yellow toner cartridge
ENWW
Tools for troubleshooting
287
To Next Page
Loading...