Document feeder top cover open
Description
The document feeder jam access cover is open.
Recommended action
Close the cover.
Event log is empty
Description
No product events are in the log.
Recommended action
No action is necessary.
Fax is disabled – ignoring call
Description
The product received a call, but the fax feature was not configured with the required settings (country/
region, date/time, company name, fax number, etc.).
Recommended action
Configure the fax with the required settings from the Administration menu on the control panel.
Finishing process not functional
Description
The finishing device indicates it cannot perform the requested finishing action (like stapling or binding).
Recommended action
The job proceeds without the finishing action being performed.
Flatbed cover open
Description
The scanner cover has been opened to access the glass.
Recommended action
Close the scanner cover.
Fuser Kit Low
Description
The product indicates when a supply level is low.
296 Chapter 2 Solve problems ENWW
To Next Page
Loading...