Install Fuser Unit
Description
The fuser is either not installed or not correctly installed in the product.
Recommended action
CAUTION: The fuser can be hot while the product is in use.
Reseat the fuser.
Install supplies
Description
More than one supply is missing or is installed incorrectly.
◦
10.00.15 (event code): Black toner cartridge
◦
10.01.15 (event code): Cyan toner cartridge
◦
10.02.15 (event code): Magenta toner cartridge
◦
10.03.15 (event code): Yellow toner cartridge
◦
10.23.15 (event code): Fuser kit
◦
10.31.15 (event code): Toner collection unit
Recommended action
1. Touch the OK button to identify which supplies need to be replaced.
2. Touch the OK button a second time for more information about the specific supply.
3. Insert the supply item or make sure the installed supply item is fully seated.
Internal disk device failure To clear touch “Clear”
Description
The specified device has failed.
Recommended action
Touch the Clear button to clear the message.
Internal disk file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Touch the Clear button to clear the message.
ENWW
Tools for troubleshooting
299
To Next Page
Loading...